CORINOX® Precision Files

Manufactured according to the highest standards of dimensional accuracy, cutting performance and service life. Compared to engineers’ files, precision files have marked tapering and smaller tips, sharp edges, strict dimensional and flatness tolerance and a higher and uniform hardness. That is obtained using, in all manufacturing steps, the most advanced CNC systems and the best available robotic technologies.
Thanks to CORINOX® coating, they:
• have a surface hardness of 1200 HV (70-72 HRc), therefore a higher wear resistance and longer service life. That allows filing of hardened and tempered steel up to 60 HRc, hard-to-file materials like heat resistant steel, exotic alloys and reinforced plastics.
• do not clog, allowing an easy work on plastics, rubber or wood.
• have a surface corrosion-free layer, which allows filing of stainless steel leaving no corrosive residue on the workpiece.
They allow filing of hard materials which normally would require diamond files, with lower cost and higher stock removal.
They are used for manufacturing of equipment for food, chemical, navy industries and nuclear powerplants. They are used in jewellery making for filing platinum.
Suitable For: steel (hardened and tempered, up to 60 HRc), heat resistant steel, stainless steel, exotic alloys (nickel, molybdenum, titanium, like Inconel, etc.), plastics (nylon, Teflon, polycarbonate), reinforced plastics, platinum.
Applications: workshop, jewellers and goldsmiths.
Suitable Handles: plastic handle


HAND 6"
Length inches: 6
Length mm: 150
Cross section mm: 18.0 x 4.0
Available Cuts: 00, 0, 2

HAND 8"
Length inches: 8
Length mm: 200
Cross section mm: 22.0 x 5.0
Available Cuts: 00, 0, 2

HAND 10"
Length inches: 10
Length mm: 250
Cross section mm: 24.0 x 5.0
Available Cuts: 00, 0, 2



REGULAR PILLAR 6"
Length inches: 6
Length mm: 150
Cross section mm: 13.0 x 4.0
Available Cuts: 00, 0

REGULAR PILLAR 8"
Length inches: 8
Length mm: 200
Cross section mm: 15.0 x 5.0
Available Cuts: 00, 0, 2



HALFROUND 6"
Length inches: 6
Length mm: 150
Cross section mm: 16.0 x 4.5
Available Cuts: 0, 2

HALFROUND 8"
Length inches: 8
Length mm: 200
Cross section mm: 21.0 x 6.0
Available Cuts: 0, 2


ROUND 6"
Length inches: 6
Length mm: 150
Cross section mm: 6.0
Available Cuts: 0

ROUND 8"
Length inches: 8
Length mm: 200
Cross section mm: 8.0
Available Cuts: 0, 2



THREE SQUARE 8"
Length inches: 8
Length mm: 200
Cross section mm: 13.0
Available Cuts: 0, 2



SQUARE 6"
Length inches: 6
Length mm: 150
Cross section mm: 5.0
Available Cuts: 0, 2

SQUARE 8"
Length inches: 8
Length mm: 200
Cross section mm: 7.0
Available Cuts: 0


Made in Italy
All our products are entirely made in Italy by CORRADI. Read more
Cut Reference      more info: scale of cut
Precision Files mm 100-150-200
cut 0016 teeth per cm (tolerance ±5%)
cut 020 teeth per cm (tolerance ±5%)
cut 125 teeth per cm (tolerance ±5%)
cut 231 teeth per cm (tolerance ±5%)
cut 338 teeth per cm (tolerance ±5%)
cut 446 teeth per cm (tolerance ±5%)
Precision Files mm 250
cut 0012 teeth per cm (tolerance ±5%)
cut 016 teeth per cm (tolerance ±5%)
cut 120 teeth per cm (tolerance ±5%)
cut 225 teeth per cm (tolerance ±5%)
cut 331 teeth per cm (tolerance ±5%)
cut 438 teeth per cm (tolerance ±5%)



Please Choose:

VersionPriceAvail.Code
12,10 €     In stockCX800.150.00
12,90 €     In stockCX800.150.01
14,60 €     In stockCX800.150.02
15,60 €     In stockCX800.200.00
16,20 €     In stockCX800.200.01
18,50 €     In stockCX800.200.02
21,40 €     In stockCX800.250.00
22,20 €     In stockCX800.250.01
25,80 € 23,25 €     In stockCX800.250.02
13,50 €     In stockCX810.150.00
14,20 €     In stockCX810.150.01
17,70 €     In stockCX810.200.00
18,30 €     In stockCX810.200.01
19,40 €     In stockCX810.200.02
20,80 €     In stockCX835.150.01
22,30 €     In stockCX835.150.02
26,20 €     In stockCX835.200.01
28,60 €     In stockCX835.200.02
10,10 €     In stockCX845.150.01
13,10 €     In stockCX845.200.01
15,10 €     In stockCX845.200.02
17,40 €     In stockCX855.200.01
18,80 €     In stockCX855.200.02
12,20 €     In stockCX860.150.01
13,40 €     In stockCX860.150.02
16,20 €     In stockCX860.200.00
Add to Cart:  







PayPal payment accepted    VISA, Mastercard, Amex, Discover debit/credit cards accepted       Trustpilot reviews
CORRADI Shop • website managed by R.M.A. TOOLS
Main currency is Euro; products' actual prices are in Euro. Exchange rates provided for information only.