Workshop



Product Image Item Name

Checkering Files - Regular Pillar, set

Overall length 6" (150 mm), cross section mm 13.0 x 4.0. 2 pieces set • 01 x cut 00 (20 lines/inch) • 01 x cut 0 (30 lines/inch) 4 pieces set • 01...
Checkering Files - Special Hand, set

Checkering Files - Special Hand, set

Overall length 6" (150 mm), cross section mm 18.0 x 4.0. 2 pieces set • 01 x cut 00 (20 lines/inch) • 01 x cut 0 (30 lines/inch) 4 pieces set • 01...
CORINOX® Needle Files, set of 6

CORINOX® Needle Files, set of 6

Manufactured using a special alloy steel, made for CORRADI, under the highest quality standards. They have strict size tolerances, uniform cut and...
CORINOX® Precision Files

CORINOX® Precision Files

Manufactured according to the highest standards of dimensional accuracy, cutting performance and service life. Compared to engineers’ files,...
Die Sinkers' Rifflers for engravers, chisellers, goldsmiths, etc

Die Sinkers' Rifflers for engravers, chisellers, goldsmiths, etc

Originally designed for die sinking, they are also used on hard-to-reach surfaces and for detail finishing on molds, castings and engravings. Overall...
Escapement Files with Square Handle

Escapement Files with Square Handle

Designed for manufacturing watch escapements, they can also be used where finer cross section and tips than needle files are requested and for...
Formica File

Formica File

Special cut with broad longitudinal chipbreaker and spade tooth. Good stock removal with, at the same time, excellent chip unloading when filing...
Handy Files with Square Handle, set of 5

Handy Files with Square Handle, set of 5

Versatile files for working on larger surfaces with higher pressure but the same precision of needle files, either on mold making or precious metals...
Lathe Files, set of 2

Lathe Files, set of 2

Single cut files used by lathe operators to deburr and finish while turning. Manufactured according to ISO 234 tolerances. Two sets available: • set...
Machinist Engineers' Files - Hand

Machinist Engineers' Files - Hand

Manufactured according to ISO 234 norm, but with higher hardness, thanks to CORRADI’s heat treatment. Used for workshop on steel, iron and non...
Needle Rasps

Needle Rasps

Manufactured using a special alloy steel, made for CORRADI, under the highest quality standards. They are hardened to HRc higher than 60, for a...

NOS Die Makers' Riffler File, 12", Three square, cut 000

Designed by CORRADI, the special die makers' riffler files are similar to die makers' rifflers, but have smaller cross section and finer tips,...
Riffler Rasps

Riffler Rasps

Specifically designed by CORRADI for woodworking, they are used for finishing models and for sculpture. They can also be used on soft metals for...
Vul-Crylic Files, set of 2

Vul-Crylic Files, set of 2

Double end Vul-Crylic file, with open, coarse teeth. A hybrid of a halfround file. Extremely versatile, it can be used on wax, wood, plastic and soft...
Machinist Engineers' Files - Halfround

Machinist Engineers' Files - Halfround

Manufactured according to ISO 234 norm, but with higher hardness, thanks to CORRADI’s heat treatment. Used for workshop on steel, iron and non...
Machinist Engineers' Files - Round

Machinist Engineers' Files - Round

Manufactured according to ISO 234 norm, but with higher hardness, thanks to CORRADI’s heat treatment. Used for workshop on steel, iron and non...
Chisel Bit Sharpening File

Chisel Bit Sharpening File

Chisel Bit Sharpening File, for sharpening square chisel chains and special hand tools. Parallel in width, single cut edges and sides. Overall length...
CORINOX® Needle Files - Three square

CORINOX® Needle Files - Three square

Manufactured using a special alloy steel, made for CORRADI, under the highest quality standards. They have strict size tolerances, uniform cut and...

Needle Files and Rasps special set

Special set of needle files and rasps, manufactured using a special alloy steel, made for CORRADI, under the highest quality standards. The 00 cut...
Needle Files Extra Quality - Warding

Needle Files Extra Quality - Warding

Manufactured using a special alloy steel, made for CORRADI, under the highest quality standards. They have strict size tolerances, uniform cut and...





PayPal payment accepted    VISA, Mastercard, Amex, Discover debit/credit cards accepted       Trustpilot reviews
CORRADI Shop • website managed by R.M.A. TOOLS
Main currency is Euro; products' actual prices are in Euro. Exchange rates provided for information only.